For the Home
The Ultra Imploder installs easily in the home. Simply locate your incoming water main. Remove a section, and install the Ultra Imploder in its place. See video below.
Hydroponics
NOTE SUGGESTED USE: If you have a reservoir, add the Ultra Imploder in a re circulation setup, pump water our of your reservoir, into the Ultra Imploder, and back into the reservoir on a continuous or timed loop setup. This way, your water will recycle through multiple times, making it more potent after each pass.
In large hydroponic gardens attach anywhere in your chain. Be aware, Ph levels are leveled towards alkalinity, no re-calibration of your automatic Ph leveling equipment is needed during, though it is normal to see Ph levels change during install, though this will level itself out within a day.
Install anywhere in your plumbing chain, the Ultra Imploder Vortex Magnetic System uses 3/4″ high grade CPVC for strength and heat resistance. The fittings are CPVC pipe fittings, which is different that hose fittings, please use a pipe to hose fitting adapter for use with a hose.
The magnetic housing (the white part) is heavy at nearly 13 lbs, please support the magnetic housing with 3″ pipe hangers.
Once supported. Now attached to your chain using standard 3/4″ plumbing pipe fittings.
Fractal Water Super Imploder (discontinued, replaced by Ultra Imploder) installed in an NFT Greenhouse
Plant Nursery
Install anywhere in your chain, if you have 2″ incoming line, 1 in each “Zone” for maximum efficiency and flow.
Install anywhere in your plumbing chain, the Vortex Magnetic System uses 3/4″ high grade CPVC for strength and heat resistance. The fittings are CPVC pipe fittings, which is different that hose fittings, please use a pipe to hose fitting adapter for use with a hose.
The magnetic housing (the white part) is heavy at nearly 13 lbs, please support the magnetic housing with 3″ pipe hangers.
Once supported. Now attached to your chain using standard 3/4″ plumbing pipe fittings.
Green House
Install anywhere in your plumbing chain, the Vortex Magnetic System uses 3/4″ high grade CPVC for strength and heat resistance. The fittings are CPVC pipe fittings, which is different that hose fittings, please use a pipe to hose fitting adapter for use with a hose.
The magnetic housing (the white part) is heavy at nearly 13 lbs, please support the magnetic housing with 3″ pipe hangers.
Once supported. Now attached to your chain using standard 3/4″ plumbing pipe fittings.
Flower Shop
Simply mount the Vortex Magnetic System next to your water source and use 3/4″ pipe to hose adapter for use in your shop.
Install anywhere in your plumbing chain, the Vortex Magnetic System uses 3/4″ high grade CPVC for strength and heat resistance. The fittings are CPVC pipe fittings, which is different that hose fittings, please use a pipe to hose fitting adapter for use with a hose.
The magnetic housing (the white part) is heavy at nearly 13 lbs, please support the magnetic housing with 3″ pipe hangers.
Once supported. Now attached to your chain using standard 3/4″ plumbing pipe fittings.
