Fractal Water Imploder Vortex Nozzle

$180.00

Use it two ways:

  • As part of the Super Imploder system: Thread directly onto the Super Imploder magnetic array for dual-stage vortex + magnetic conditioning

Complete your system: Pair with the Super Imploder magnetic array for dual-stage treatment, or add a ReCharger downstream for extended magnetic conditioning at the point of use.

Description

Boost with a ReCharger

For longer pipe runs between the Super Imploder and the point of use, add a Fractal Water ReCharger downstream to reinforce the magnetic treatment exactly where it matters most. The Super Imploder’s vortex nozzle provides the structuring stage, the magnetic array provides the primary magnetic conditioning, and the ReCharger extends that magnetic effect through longer distances — ensuring full-strength treatment arrives at the fixture, emitter, or appliance.

  • Residential: Super Imploder on the main line + ReCharger at the water heater inlet or kitchen tap
  • Agriculture: Super Imploder at the pump + ReCharger at distant irrigation zones or greenhouse benches
  • Commercial: Super Imploder on the supply + ReCharger at individual equipment (ice machines, dishwashers, cooling tower makeup)

The ReCharger uses 3/4″ NPT female threads on both ends — matching the Super Imploder’s connections — so it installs inline with the same fittings. See the ReCharger product page for detailed specifications and application-specific installation guides.


Frequently Asked Questions

How does it connect to the Super Imploder?
Both use matching 3/4″ NPT threads — they thread together directly with no adapters. Apply PTFE tape and use two wrenches (one to hold, one to turn).

What pressure can it handle?
The heat-welded construction is rated to 320 PSI (22 bar) continuous, with burst tested at 328 PSI. This exceeds all residential (40–80 PSI), agricultural (15–60 PSI), and commercial (60–100 PSI) pressures. See the Water Hammer Advisory for transient pressure precautions.

How long does it last?
Technyl Safe PA 66 GF30 is rated for 20+ years in continuous water contact. With proper support and installation, the nozzle will outlast most plumbing systems.

Can I use it on hot water lines?
Yes. Continuous service rated to 110°C (230°F). Suitable for hot water heater inlets, shower feeds, and commercial hot water applications.

Is it compatible with the Ultra Imploder?
No. The Ultra Imploder uses an integrated 1″ stainless steel vortex nozzle — it is a one-piece design. This 3/4″ Technyl nozzle is designed for the Super Imploder system.


Questions? Call us toll-free at 1 (888) 897-6968.

Additional information

Weight 0.53 lbs
Dimensions 8.3 × 4.21 × 4.21 in
Connection

3/4" NPT female thread (both ends)

Overall Length

8.3 in (210 mm)

Maximum Diameter

4.21 in (107 mm)

Thread Length

0.82 in (21 mm) each end

Body Clearance

0.59 in (15 mm) between body and pipe centerline

Material

Technyl Safe A 219WFC V30 NC (PA 66 GF30)

Finish

Pantone Cool Gray 8 C

Weight

0.60 lbs (0.27 kg)

Design

Golden ratio vortex geometry with inner cone sub-assembly

Compatibility

Fractal Water Super Imploder 3/4" (FWSI34)

Electricity Required

None

Maintenance Required

None

Warranty

10-year limited warranty

Construction

Heat-welded dual-shell (fused halves — no adhesive joints)

Tested Pressure

320 PSI (22 bar) — continuous rated

Burst Pressure

328 PSI (22.6 bar)

You may also like…