Whether on the go, emergency preparedness or for daily use, be at ease knowing you have clean drinkable water with a ProOne® Gravity water filtration system.
Easy to set up. No electricity or plumbing required. Use with just about any potable water source whether at home, office, school, camping or traveling.
All ProOne® gravity systems feature ProOne® G2.0 “all-in-one” NSF/ANSI-42 component certified filter technology – the smarter filter™. Independent lab tested to NSF standards 42, 53, P231, microplastics,1,4 Dioxane, Microcystin, emerging contaminants, PFOAS (GenX), TTHM’s, bacteria, Fluoride, Lead, Parasites and more. Visit our lab reports for full details on the 200+ tested contaminants.
New ProOne® Gravity Gripper exclusive design makes it easy to lift the upper container to view how much water is in the lower container. The Traveler+ Gripper style is made from 304 stainless for long lasting durability and includes a stainless 304 spigot and non-slip pad.
Filter life expectancy may vary depending on specific water chemistry and filter cleaning frequency
ProOne® Traveler+ system features include:
Recommended for 1-3 users
2.25 gallon capacity
Standard # of filters: 1
Maximum # of filters: 1
Nested Dimensions: 8.5″ x 11″
Assembled Dimensions: 8.5″ x 20.5″
Embossed with the ProOne® logo
Includes 1 ProOne® G2.0 5″ Filter Element
Includes stainless steel spigot and non-slip pad
Includes 6″ wire stand
Hardware kit now includes wrench for easy install of the stainless steel spigot
From Wikipedia, the free encyclopedia
“A TDS Meter indicates the Total Dissolved Solids (TDS) of a solution, i.e. the concentration of dissolved solids in it. Since dissolved ionized solids such as salts and minerals increase the conductivity of a solution, a TDS meter measures the conductivity of the solution and estimates the TDS from that. A TDS meter typically displays the TDS in parts per million (ppm). For example, a TDS reading of 1 ppm would indicate there is 1 milligram of dissolved solids in each kilogram of water.”
TDS is a measure of total dissolved solids and NOT dissolved contaminants. A higher TDS can simply be high calcium or mineral content. As Propur™ filters are made from minerals, TDS may be higher after the water has been treated. This does not mean the filter isn’t working, it means the TDS meter is picking up the minerals that are naturally released by the filter. A PPM meter is the same as a TDS meter, it is simply measures dissolved solids in water. A TDS meter is not generally recognized in the industry as a proper means of testing water for contaminants. They were created years ago by the manufacturers of reverse osmosis systems as a means of demonstrating the effectiveness of RO which removes most if not all minerals.